Step 1: Make sure the battery is properly conditioned.

Either follow these instructions for conditioning the battery manually or use the NewerTech Intelligent Battery Charger and Conditioner for your model battery.

Step 3: Open Apple System Profiler.

The easiest way to do this is to select "About this Mac" from the Apple Menu, then click the "More Info…" button in the window that pops up.

Step 4: Select "Power" from the list on the left.

This is located under the "Hardware" heading. All the subheads are listed alphabetically.

Step 5: Find how much charge is being held.

Under the "Battery Information" section on the right, there will be a section called "Charge Information". If the "Fully Charged" indicator states "Yes" and the "Charging" indicator states "No," then the "Charge remaining" is the charge in milliamp hours (mAh) that your battery is currently capable of holding.

The "Full Charge Capacity" is the maximum amount of charge (in mAh) that your battery can take; as batteries degrade over time, this number represents the battery's capacity when new.

Step 6: Determine how much of the maximum capacity your battery is retaining.

Divide the "Charge Remaining" number by the "Full charge capacity" number, then multiply by 100. This number is the percentage of the original capacity that your battery is currently capable of retaining. NewerTech NuPower^® Batteries are considered within normal operating parameters if they retain 80% or more of their original capacity when tested in this manner.

If the battery is retaining less than 80% of its original capacity when tested, a printed copy of the "Power" section of your Apple System Profiler report is required to set up a return. (Note when printing: Be sure to check the option to print just the "Selected section" and not the "Entire document". This will reduce the paper used from
several hundred pages to a single one.)